WTC693 WTC 2-Channel Battery Charger Holder for Motorola Batteries NNTN8020 and NNTN8023
€187.66
Available in 30 days, In stock within 3–4 weeks
Product information "WTC693 WTC 2-Channel Battery Charger Holder for Motorola Batteries NNTN8020 and NNTN8023"
The 2-in-1 charging holders offer you the possibility to charge two additional batteries for your radio device in your vehicle. The two-color LED indicates fast charging and maintenance charging in the usual colors (red and green) for each charging slot.
Charging possible with attached belt clip!
The above-mentioned batteries are compatible with MOTOROLA radios MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, MTP6550, MTP6650, and MTP6750
Scope of delivery
1x WTC695
1x DC cable [800023],
1x mounting bracket [800868],
1x cable tie [700113],
4x knurled screw [800025]
| Categories: | mobile Charger |
|---|---|
| Compatible with: | MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, MTP6550, MTP6650, MTP6750 |
Safety and Warning Information
Information regarding certification, disposal, and safety for this product can be found directly on the packaging or in the documents included with the product.
Manufacturer:
WEMPE Elektronic GmbH
Leinenweberstr. 6
DE 36251 Bad Hersfeld
Contact: info@wetech.de
Phone: 06621 9240 0
Responsible Person for the EU
WEMPE Elektronic GmbH
Leinenweberstr. 6
DE 36251 Bad Hersfeld
Contact: info@wetech.de
Phone: 06621 9240 0
Login
Similar Products
Charging holder for MOTOROLA radios GP320 to GP680, GP1280, GP340ATEX, GP380ATEX and MTP850EX; Usable with the batteries HNN4003A, PMMN4159AR, HNN9008A, NNTN5510AR, NNTN5510CR, NNTN7383A, HNN4001A, HNN9013D, HNN9012AR, PMNN4151AR Input voltage 10 to 30 volts The passive charging holder is small and compact. It provides the functions of fast charging and trickle charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Note The use of EX batteries is technically possible with our product, but may be undesirable by the radio manufacturer. The manufacturer's specifications are decisive here. Scope of delivery: 1x WTC620 1x DC cable [800023], 1x mounting bracket [800091], 1x cable tie [700113], 4x knurled screw [800025] For secure locking, an original belt clip is recommended.
Available at short notice (usually 3-5 days)
Passive charging holder for MOTOROLA radios Commercial CP040, CP080 and DP1400. Does NOT fit R2 Usable with the batteries PMNN4253AR, PMNN4251AR and NNTN4497AR. General instructions for use The passive charging holder is small and compact. It provides the functions of quick charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Scope of delivery 1x WTC642 1x DC cable [800023], 1x mounting bracket [800300], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
Passive charging holder for MOTOROLA radios GP344, GP388 and DP3441. Usable with the batteries PMNN4074A, PMNN4073A, JMNN4023A, PMNN4440AR, PMNN4202AR and PMNN4502A. The passive charging holder is small and compact. It provides the functions of quick charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. Scope of delivery 1x WTC644 1x DC cable [800023], 1x mounting bracket [800244], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
Passive charging holder for SEPURA radio devices STP8000, STP9000 and SC20. Usable with the original batteries. The passive charging holder is small and compact. It provides the functions of fast charging and maintenance charging for your radio device in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. Scope of delivery 1x WTC1803 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
PassivPlus charging holder for SEPURA SC20 Usable with the original batteries. The PassivPlus charging holder offers, in addition to the usual functions of fast charging and charge maintenance, the possibility of connecting an external antenna. Furthermore, the WTC1902USB has a USB data interface integrated, through which the charging holder can be connected to a PC with a USB programming cable. This connection allows for programming the radio device directly in the charging holder. The locking of the radio device is done by a pressure mechanism at the upper end of the charging holder. The charging holder is connected to the on-board network. Scope of delivery 1x WTC1902 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
Charging holder for EADS radios THR880 and THR880I; Usable with batteries BLN-EX The passive charging holder is small and compact. It provides fast charging and maintenance charging functions for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board power supply. Scope of delivery 1x WTC686 1x DC cable [800023], 1x mounting bracket [800527], 1x cable tie [700113], 4x knurled screw [800025]
PassivPlus charging holder for SEPURA SC20 Usable with the original batteries. The PassivPlus charging holder offers, in addition to the usual functions of fast charging and charge maintenance, the possibility of connecting an external antenna. Furthermore, a data interface is integrated into the WTC1902SER. Through this, for example, an RS232 programming cable can be connected. Please note the pin assignment, see downloads. To use the PEI function, an additional license for the radio device is required. The locking of the radio device is done by a pressure mechanism at the upper end of the charging holder. The charging holder is connected to the on-board network. Scope of delivery 1x WTC1902 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
for mounting the charging holder in the vehicle
Available at short notice (usually 3-5 days)
Passive charging holder for SEPURA radios STP8000 and STP9000. Usable with corresponding original batteries. The passive charging holder provides fast charging and maintenance charging functions for your radio in the vehicle. The two LEDs indicate the currently active function. The locking of the radio is done by a pressure mechanism at the upper end of the charging holder. The charging holder is connected to the on-board power supply. Scope of delivery 1x WTC621 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
PassivPlus Charging Mount for KENWOOD Radios TK-290FuG11b Compatible with the batteries KNB-21N, CPKKNB17A, and R290. The PassivPlus Charging Mount offers, in addition to the usual functions of fast charging and charge maintenance, the possibility to connect an external antenna. For this, an additional antenna adapter is required (not included in the delivery), so that the signal from the external antenna is used instead of the conventional signal from the radio. This can be purchased separately [500228] SMA Antenna adapter. The charging mount is connected to the onboard power supply. Scope of delivery 1x WTC675 1x DC Cable [800023], 1x Mounting Bracket [800644], 1x Cable Tie [700113], 4x Knurled Screw [800025]
Passive charging holder for HYTERA radios PD685, PD785, PT580, and PD795EX. Usable with the batteries BL1504, BL1807, BL1806, BL2006, BL1807EX, BL2008, BL2010, BL2503, and BL3001. The passive charging holder is small and compact. It provides the functions of fast charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board power supply. For secure locking, an original belt clip is recommended. Note The use of EX batteries is technically possible with our product, but may be undesirable by the radio manufacturer. The manufacturer's specifications are decisive here. Scope of delivery 1x WTC618 1x DC cable [800023], 1x mounting bracket [800784], 1x cable tie [700113], 4x knurled screw [800025]
Available in 30 days, In stock within 3–4 weeks
Passive charging holder for KENWOOD radios TK-3201, TK-2202E2, TK-2302 and TK-3301. Usable with the batteries KNB-29N, KNB-30A and KNB-45L. The passive charging holder is small and compact. It provides the functions of fast charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board power supply. For secure locking, an original belt clip is recommended. Scope of delivery 1x WTC649 1x DC cable [800023], 1x mounting bracket [800368], 1x cable tie [700113], 4x knurled screw [800025]
Available in 30 days, In stock within 3–4 weeks
PassivePlus charging holder for SEPURA radios STP8000 and STP9000. Usable with the original batteries. The PassivePlus charging holder offers, in addition to the usual functions of fast charging and charge maintenance, the possibility of connecting an external antenna. The locking of the radio device is done by a mechanism at the upper end of the charging holder. Via the SUB-D connector, additional accessories can be connected. For example, an RS232 programming cable. Please note the pin assignment (see below). The charging holder is connected to the on-board network. Scope of delivery 1x WTC672 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
PassivePlus charging holder for MOTOROLA radios MTP850, MTP830, MTP830S and MTP830FuG Compatible with batteries FTN6574, FTN4331 and PMNN4351. The PassivePlus charging holder offers, in addition to the usual functions of fast charging and charge maintenance, the possibility to connect an external antenna. Additionally, a SUB-D connector is integrated in the WTC676, to which various additional modules can be connected or connections to other devices can be made. You can find the pin assignment at the end of the product page. The locking of the radio device is done by a mechanism at the upper end of the charging holder. The charging holder is connected to the on-board network. Only usable with belt clip PMLN5616 Scope of delivery 1x WTC676 1x DC cable [800023], 1x mounting bracket [800693], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
Passive charging holder for MOTOROLA radios MTP850, MTP850s, MTP850FuG, CEP400, MTH650, and MTH800. Usable with the batteries FTN6574, FTN4331, PMNN4351. The WTC692 offers you, in addition to the possibility of charging your radio in the vehicle, an additional charging slot for charging a spare battery. For secure locking, an original belt clip is recommended. Scope of delivery 1x WTC692 1x DC cable [800023], 1x mounting bracket [800459], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
2-Channel Battery Charger Holder for SEPURA Batteries of the Radios STP8000, STP9000, SC2020 and SC2021 The 2-in-1 charger holders offer you the possibility to charge two additional batteries for your radio in your vehicle. The two-color LED indicates fast charging and maintenance charging in the usual colors (red and green) for each charging slot. Scope of delivery 1x WTC691 1x DC Cable [800023], 1x Mounting Bracket [800838], 1x Cable Tie [700113], 4x Knurled Screw [800025]
Available at short notice (usually 3-5 days)
Active charging holder for KENWOOD radios TK-290FuG11b. Usable with the batteries KNB-17 and R290 The active vehicle charging holder offers you the possibility to connect an external antenna to the radio via the charging holder. The charging holder is connected to the side connections of the radio, allowing communication via the included handheld microphone. While your radio is used in the charging holder, the functions of fast charging and maintenance charging are additionally available to you. Through the SUB-D connector, additional accessories can be connected. The charging holder is connected to the on-board network. Scope of delivery 1x WTC632 1x DC cable [800023], 1x mounting bracket [800229], 1x cable tie [700113], 4x knurled screw [800025], 1x microphone MS61 [600105] 1x SUB-D connector 15-pin including housing
Available in 30 days, In stock within 3–4 weeks
Passive Ladehalterung für KENWOOD Funkgeräte TK-2140, TK-3160, TK-3170, NX-220, NX-3200 und TK320. Verwendbar mit den Akkus KNB-26N, KNB-25A, KNB-24L, KNB-55L, KNB-35L und KNB-57L. Die passive Ladehalterung ist klein und kompakt. Sie stellt die Funktionen Schnellladung und Ladeerhaltung für Ihr Funkgerät im KFZ zur Verfügung. Über die beiden LED wird die jeweils aktive Funktion angezeigt. Die Ladehalterung wird am Bordnetz angeschlossen. Für eine sichere Arretierung wird ein original Gürtelclip empfohlen. Lieferumfang 1x WTC646 1x DC Kabel [800023], 1x Haltewinkel [800258], 1x Kabelbinder [700113], 4x Rändelschraube [800025]
Available at short notice (usually 3-5 days)
including DC cable, mounting bracket, 4 knurled screws, cable ties, user manual. Suitable for Sepura original batteries.
Available at short notice (usually 3-5 days)
PassivPlus charging holder for MOTOROLA radios MTP6550, MTP6650, and MTP6750. Usable with the batteries NNTN8020 and NNTN8023. The PassivPlus charging holder offers, in addition to the usual functions of fast charging and charge maintenance, the possibility of connecting an external antenna. The locking of the radio device is done by a pressure mechanism at the upper end of the charging holder. The charging holder is connected to the on-board network. Scope of delivery 1x WTC623 1x DC cable [800023], 1x mounting bracket [800858], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
The 2-in-1 charging holders offer you the possibility to charge two additional batteries for your radio device in your vehicle. The two-color LED indicates fast charging and maintenance charging in the usual colors (red and green) for each charging slot. Charging possible with attached belt clip! The above-mentioned batteries are compatible with MOTOROLA radios MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, MTP6550, MTP6650, and MTP6750 Scope of delivery 1x WTC695 1x DC cable [800023], 1x mounting bracket [800868], 1x cable tie [700113], 4x knurled screw [800025]
Available in 30 days, In stock within 3–4 weeks
Car quick charger/mount 10/31.2V for the MOTOROLA handheld radio CP040 Mount in stable metal design. Complete with mounting plate, holder, cable set
Available at short notice (usually 3-5 days)
Charging mount for SEPURA radios SC2020, STP8000 and STP9000. Usable with the original batteries. The passive charging mount is small and compact. It provides the functions of quick charging and charge maintenance for your radio in the vehicle. The two LEDs indicate the currently active function. The charging mount is connected to the on-board network. For secure locking, an original belt clip is recommended. Scope of delivery: 1x WTC1702 1x DC cable [800023], 1x mounting bracket [800551], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
Charging holder for MOTOROLA radios MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, MTP6550, MTP6650 and MTP6750. Usable with the batteries NNTN8023 and NNTN8020 (NNTN8020 only with the adapter plate Art.-Nr. 800891). The passive charging holder is small and compact. It provides the functions of fast charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Scope of delivery 1x WTC669 1x DC cable [800023], 1x Mounting bracket [800825], 1x Cable tie [700113], 4x Knurled screw [800025]
Available at short notice (usually 3-5 days)
Passive 2-Channel Battery Charging Holder for MOTOROLA Batteries NNTN8020 and NNTN8023 The 2-in-1 charging holders offer you the possibility to charge two additional batteries for your radio device in your vehicle. The two-color LED indicates fast charging and maintenance charging in the usual colors (red and green) for each charging slot. Charging possible with attached belt clip! Scope of delivery 1x WTC695 1x DC Cable [800023], 1x Mounting Bracket [800868], 1x Cable Tie [700113], 4x Knurled Screw [800025] The above-mentioned batteries are compatible with the MOTOROLA radio devices MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, MTP6550, MTP6650, and MTP6750
Available at short notice (usually 3-5 days)
Passive charging holder for MOTOROLA radios DP3400, DP3401, DP3600, DP3601, DP2400, DP4400e, DP4401, DP4800, DP4801 and DP2400E. Usable with the batteries PMNN5077A, PMNN4065A, PMNN4104A, PMNN4101A, PMNN4069A, PMNN4066A, PMNN4065A, PMNN4415, PMNN4407, NNTN8359A, PMNN4407AR, PMNN4412AR, PMNN4409AR, PMNN4406BR, PMNN4491 and PMNN4493. The passive charging holder is small and compact. It provides the functions of quick charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Note The Motorola DP3441 radio does not fit into the WTC636. The WTC644 is available for this radio. Scope of delivery 1x WTC636 1x DC cable [800023], 1x mounting bracket [800191], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
Active charging mount for MOTOROLA radios DP3400, DP3401, DP3600, and DP3601. Usable with the batteries PMNN5077A, PMNN4065A, PMNN4104A, PMNN4069A, PMNN4065A, and CPM4065. The active car charging mount allows you to connect an external antenna to the radio via the charging mount. For this, an additional antenna adapter (not included) is required. This can be purchased separately [500228] SMA antenna adapter. The charging mount is connected to the side ports of the radio, allowing communication via the included hand microphone. While your radio is used in the charging mount, the functions of quick charging and maintenance charging are additionally available. Additional accessories can be connected via the SUB-D connector. The charging mount is connected to the on-board network. Scope of delivery 1x WTC662 1x DC cable [800023], 1x mounting bracket [800638], 1x cable tie [700113], 4x knurled screw [800025], 1x microphone MS61 [600105] 1x SUB-D connector 15-pin including housing
Available at short notice (usually 3-5 days)
Car Quick Charger/Mount 10/30 Vfor the MOTOROLA handheld radio 320/1280Mount in sturdy metal design.Complete with mounting plate, holder,cable set. Only NiMh battery
Available in 30 days, In stock within 3–4 weeks
Charging holder for MOTOROLA radios MTP850, MTP850S, MTP850FuG, CEP400, MTH650 and MTH800. Usable with the batteries FTN6574, FTN4331 and PMNN4351. The passive charging holder is small and compact. It provides the functions of quick charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board power supply. For secure locking, an original belt clip is recommended. Scope of delivery: 1x WTC680 1x DC cable [800023], 1x mounting bracket [800459], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
2-fold charging holder for MOTOROLA radios; Usable with the batteries FTN6514, FTN4331 and PMNN4351 The 2-in-1 charging holders offer you the possibility to charge two additional batteries for your radio in your vehicle. The two-color LED indicates fast charging and maintenance charging in the usual colors (red and green) for each charging slot. The above-mentioned batteries are compatible with MOTOROLA radios MTP850, MTP850s, MTP850FuG, CEP400, MTH650 and MTH800 Scope of delivery 1x WTC690 1x DC cable [800023], 1x mounting bracket [800531], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)