WTC1702 Car Quick Charger Mount for Connection to 10V 24V Charging Mount for SEPURA Radios SC2020 STP8000 STP9000
Charging mount for SEPURA radios SC2020, STP8000 and STP9000. Usable with the original batteries. The passive charging mount is small and compact. It provides the functions of quick charging and charge maintenance for your radio in the vehicle. The two LEDs indicate the currently active function. The charging mount is connected to the on-board network. For secure locking, an original belt clip is recommended. Scope of delivery: 1x WTC1702 1x DC cable [800023], 1x mounting bracket [800551], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
WTC1803 Vehicle Charging Holder Passive 12/24V, with Mechanical Locking, for STP8/9000, SC20
Passive charging holder for SEPURA radio devices STP8000, STP9000 and SC20. Usable with the original batteries. The passive charging holder is small and compact. It provides the functions of fast charging and maintenance charging for your radio device in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. Scope of delivery 1x WTC1803 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
SEPURA car charger 12/24V, for device incl. battery or single battery for Sepura STP8X 300-00848
incl. connection cable for vehicle battery, this charger is approved in accordance with the ATEX directive for charging a Sepura ATEX battery for the STP8X series, but only in a non-hazardous environment - do not use in hazardous areas!
Available at short notice (usually 3-5 days)
WTC2113 Car Charging Holder Passive 12/24V for Motorola MXP600
Passive charging holder for MOTOROLA radios MXP600. Usable with the batteries PMNN4801, PMNN4802, and PMNN4582. The passive charging holder is small and compact. It provides the functions of fast charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Scope of delivery 1x WTC2113 1x DC cable [800023], 1x mounting bracket [801061], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
WTC1702 Bracket for WTC1702, WTC681 and WTC689
for mounting the charging holder in the vehicle
Available at short notice (usually 3-5 days)
WTC2110 Vehicle Charging Holder Passive 12/24V for Motorola MXP600
Passive charging holder for MOTOROLA radio MXP600. Usable with batteries PMNN4801, PMNN4802, and PMNN4582. The passive charging holder provides fast charging and maintenance charging functions for your radio in the vehicle. The two LEDs indicate the currently active function. The locking of the radio is done by a pressure mechanism at the upper end of the charging holder. The charging holder is connected to the on-board power supply. Scope of delivery 1x WTC2110 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
WTC2115 Passive 2-Channel Battery Charger Holder for MOTOROLA Batteries PMMN4802A, PMMN4801A and PMNN4582A.
The 2-in-1 charging holders offer you the possibility to charge two additional batteries for your radio in your vehicle. The two-color LED indicates fast charging and maintenance charging in the usual colors (red and green) for each charging slot. Charging with attached belt clip possible! The batteries MOTOROLA PMNN4802A, PMNN4801A and PMNN4582A are compatible with the MOTOROLA radio MXP600. Scope of delivery 1x WTC2115 1x DC cable [800023], 1x mounting bracket [800868], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
CoPacks car charger cable 12-24 Volt for charger 403145, 403155 and others | 403155-KFZ
CoPacks car charger cable 12-24 Volt for charger 403155 compatible with Palfinger Scanreco 590 960,403145 compatible with HBC FUB3, FUB5, FUB10 and othersnon originalPROPERTIES:Model: 12-24 Voltfor manufacturer: Palfinger ScanrecoProducer: no original
In stock
SEPURA cigarette lighter cable 12/24V DC, for SC20, SC21 300-01466
SEPURA cigarette lighter cable 12/24V DC, for SC20, SC21 300-01466
Available at short notice (usually 3-5 days)
WTC680 Car Quick Charger Holder 10V 30V for the MOTOROLA Handheld Radio MTP850
Charging holder for MOTOROLA radios MTP850, MTP850S, MTP850FuG, CEP400, MTH650 and MTH800. Usable with the batteries FTN6574, FTN4331 and PMNN4351. The passive charging holder is small and compact. It provides the functions of quick charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board power supply. For secure locking, an original belt clip is recommended. Scope of delivery: 1x WTC680 1x DC cable [800023], 1x mounting bracket [800459], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
WTC1703 Car Charging Mount PassivPlus 12/24V for STP8/9000, SC20
including DC cable, mounting bracket, 4 knurled screws, cable ties, user manual. Suitable for Sepura original batteries.
Available at short notice (usually 3-5 days)
WTC636 Vehicle Charging Holder Passive 12/24V for Motorola DP2000, DP4000, R7, R5
Passive charging holder for MOTOROLA radios DP3400, DP3401, DP3600, DP3601, DP2400, DP4400e, DP4401, DP4800, DP4801 and DP2400E. Usable with the batteries PMNN5077A, PMNN4065A, PMNN4104A, PMNN4101A, PMNN4069A, PMNN4066A, PMNN4065A, PMNN4415, PMNN4407, NNTN8359A, PMNN4407AR, PMNN4412AR, PMNN4409AR, PMNN4406BR, PMNN4491 and PMNN4493. The passive charging holder is small and compact. It provides the functions of quick charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Note The Motorola DP3441 radio does not fit into the WTC636. The WTC644 is available for this radio. Scope of delivery 1x WTC636 1x DC cable [800023], 1x mounting bracket [800191], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
WTC669 Vehicle Charging Holder Passive 12/24V for Motorola MTP3000, MTP6000
Charging holder for MOTOROLA radios MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550, MTP6550, MTP6650 and MTP6750. Usable with the batteries NNTN8023 and NNTN8020 (NNTN8020 only with the adapter plate Art.-Nr. 800891). The passive charging holder is small and compact. It provides the functions of fast charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Scope of delivery 1x WTC669 1x DC cable [800023], 1x Mounting bracket [800825], 1x Cable tie [700113], 4x Knurled screw [800025]
Available at short notice (usually 3-5 days)
WTC662 Car Quick Charger Mount with Hand Microphone 12V 24V for MOTOROLA Handheld Radio DP3400 DP3600
Active charging mount for MOTOROLA radios DP3400, DP3401, DP3600, and DP3601. Usable with the batteries PMNN5077A, PMNN4065A, PMNN4104A, PMNN4069A, PMNN4065A, and CPM4065. The active car charging mount allows you to connect an external antenna to the radio via the charging mount. For this, an additional antenna adapter (not included) is required. This can be purchased separately [500228] SMA antenna adapter. The charging mount is connected to the side ports of the radio, allowing communication via the included hand microphone. While your radio is used in the charging mount, the functions of quick charging and maintenance charging are additionally available. Additional accessories can be connected via the SUB-D connector. The charging mount is connected to the on-board network. Scope of delivery 1x WTC662 1x DC cable [800023], 1x mounting bracket [800638], 1x cable tie [700113], 4x knurled screw [800025], 1x microphone MS61 [600105] 1x SUB-D connector 15-pin including housing
Available at short notice (usually 3-5 days)
WTC3204PS charging cradle for Motorola R2 with batteries PMNN4600 PMNN4598
Scope of delivery 1× WTC3204PS passive charging cradle for your Motorola R2 1× DC cable 1× mounting bracket 1× cable tie 4× knurled screws Compatible with belt clip: PMLN7008 Compatible with batteries: PMNN4600, PMNN4598 Electrical input: 5–36 VDC / 2.1 A Electrical output: max. 11.6 VDC / 2 A Note: The belt clip PMLN4651 is not compatible with this product.
In stock
WTC2111 PassivPlus Charging Mount for MOTOROLA Radio MXP600. Usable with batteries PMNN4801, PMNN4802, and PMNN4582.
PassivPlus Charging Mount for MOTOROLA Radio MXP600. Usable with batteries PMNN4801, PMNN4802, and PMNN4582. The PassivPlus Charging Mount offers, in addition to the usual functions of fast charging and charge maintenance, the possibility of connecting an external antenna. The locking of the radio occurs through a pressure mechanism at the upper end of the charging mount. The charging mount is connected to the vehicle's electrical system. Scope of delivery 1x WTC2111 1x DC cable [800023], 1x mounting bracket [800584], 1x cable tie [700113], 4x knurled screw [800025]
In stock
Motorola Car Charger 12-24V MTP8550Ex MTP8500EX GMLN5442A
This product is suitable for charging MOTOROLA MTP8500Ex and MTP8550Ex radios in combination with the MOTOROLA NNTN8570A, NNTN8570B, and NNTN8570C batteries. The following items are included in the scope of delivery: 1x Passive Charger GMLN5442A 1x Mounting Bracket for GMLN5442A 1x Passive Accessory Kit
Available at short notice (usually 3-5 days)
Motorola Travel Charger with VPA adaptor PMLN7089A
Travel Charger with VPA adaptor • Dimensions HxWxD (mm):70x70x70 • Weight (Kg): 0.3 with Bracket • Chemistry: Li-ION/NiMH • Number of Pockets : 1 • Maintenance System: No • Operating Voltage: 12 - 24 volt • Line Cord: Other • Display: No • Charger Type: Rapid
In stock
Kenwood KVC-19 vehicle cradle, fast charging, single 12-36 VDC
Kenwood KVC-19Vehicle Mount, Quick Charge, Single (12-36 VDC)Vehicle Quick ChargerRechargeable Battery Models: KNB-29N - KNB-30A - KNB-45LCompatible with, among others, the following radios:NX1000 and analog handheld radios
In stock
SEPURA Car-Kit Power, car charging holder 12/24V for SC21 41800579
SEPURA Car-Kit Power, car charging holder 12/24V for SC21 41800579
Available at short notice (usually 3-5 days)
Motorola Travel Charger with VPA adaptor NNTN8525A
Travel Charger with VPA adaptor • Dimensions HxWxD (mm):70x70x70 • Weight (Kg): 0.3 with Bracket • Chemistry: Li-ION/NiMH • Number of Pockets : 1 • Maintenance System: No • Operating Voltage: 12 - 32 volt • Line Cord: Other • Display: No • Charger Type: Rapid
Available at short notice (usually 3-5 days)
WTC642 Car Charging Holder passive 12/24V for Motorola CP040 / DP1400 with batteries:
Passive charging holder for MOTOROLA radios Commercial CP040, CP080 and DP1400. Does NOT fit R2 Usable with the batteries PMNN4253AR, PMNN4251AR and NNTN4497AR. General instructions for use The passive charging holder is small and compact. It provides the functions of quick charging and maintenance charging for your radio in the vehicle. The two LEDs indicate the currently active function. The charging holder is connected to the on-board network. For secure locking, an original belt clip is recommended. Scope of delivery 1x WTC642 1x DC cable [800023], 1x mounting bracket [800300], 1x cable tie [700113], 4x knurled screw [800025]
Available at short notice (usually 3-5 days)
USB-C charging cable for SC20, SC21
For adapting SC20/SC21. Possible charging via USB-C for PC, car or powerbank. Power required min. 9V / 20 Watts.
Available at short notice (usually 3-5 days)
Car Charging holder for Motorola R7 R7a DP2000e DP4000e LHM740
At a glance: Large operating voltage range Gold-plated contacts for durability Light design to indicate charging status and conveniently locate charging Position Raffined guide and latch mechanisms ensure proper fit of the radio in the cradle Keypad, side buttons and accessory port remain accessible when the radio is in the cradle Charging is still controlled by the radio, so battery life is maintained Supports all batteries that are also supported by the radio Operating voltage 10 to 32 V (DC) - ideal for cars and trucks package includes: Charging holder with mounting plate Power cable with open ends
Available at short notice (usually 3-5 days)